CP-UVR-0401F2-PI
cp plus

CP-UVR-0401F2-PI

4 Ch. H.265 AI Mobile Video Recorder

  • Supports 4-ch 2MP analog cameras and 1-ch 2MP IP cameras input
  • Support Instastream/ H.265 video compression
  • Aviation connectors adopted
  • Support 2 SD cards (up to 256GB for each), 2 USB Ports (2.0)
  • Supports DSM/ADAS/BSD
  • Support GPS
  • Mobile Software: EMSS Pro, iCMOB/gCMOB (Live view and Playback)
  • CMS Software: EMSS Pro, KVMS Pro (Live view and Playback)
Datasheet User Manual
Processor High-performance industrial embedded micro-controller
Operating System Embedded LINUX
Two-way Talk Supported
Operation Interface WEB, AV
IP Camera Input 1 IP camera, up to 1080P resolution
Video Output AV OUT×1
Video Compression H.265, H.264, Smart H.264
Encode Strategy Instastream
Video Frame Rate PAL: 1-25fps, NTSC: 1-30fps
Video Resolution 800 x 600
Video Display Split 1/4/6
OSD Channel, time, GPS position, license plate
Analog Camera Input 4 HDCVI/AHD/TVI/CVBS cameras, up to 1080P resolution (Audio input is not supported when connecting AHD/TVI/CVBS cameras)
Dual-Stream Supported (up to D1 encoding for sub stream)
Image Quality Adjustment Image quality adjustable across six levels
Audio Compression G.711A/G.711U/PCM
Audio Input 4 channels PoE audio input
Audio Output 1 aviation port for audio output, 1 audio talk output
Alarm Input 6 channels for alarm input, 1 channel for pulse speed measuring
Alarm Output 1 channel of controllable 12V alarm output, digital quantity
SD Card 2 SD card, Up to 256GB Each
ADAS Alerts for forward collision, lane departure and vehicles distance too close
GPS Support Yes
DSM Supports detection of drowsy driving, distracted driving, calling while driving, no driver, wearing IR blocking sunglasses, smoking when driving and lens tamperin
BSD Blind Spot Detection
Recording Mode Auto, Manual, motion detection, schedule, alarm Record alarm > alarm > motion detection > schedule
General Alarm Motion detection, video tampering and loss, local alarm, camera offline, manual alarm control, DSM, ADAS and BSD alar
Abnormal Alarm No HDD, HDD error, insufficient capacity, illegal login, ACC off, high temperature, rollover, battery low voltage, over speed, low speed, collision, tapid turn, rapid speedup, hard braking, low battery safety exception, network security exception
Alarm Linkage Record, snapshot, local external alarm output, buzzer, log, screen prompt, tour
Gyroscope Supports event detection and alarm such as rollover, collision, rapid speedup/slowdown/turn
Recording Playback 1, 4
Backup Mode HDD, USB flash drive and network backup
Interface Ports Front panel: 1 × USB 2.0 Rear panel: 1 × USB 2.0 from EXTEND port, 1 Port RS232, 1 Port RS485, 1 TV Output, 1 Pulse Count
Power Supply DC 6-36V with the built-in UPS (Enables system protection in normal power cut-off and in Under voltage of vehicle battery.)
Network Port 1 × 10M/100M RJ45 (rear panel)
Power Consumption 6.7W (without peripheral), Low power consumption: < 0.1W
Operating Temperature -30 °C to +70°C (–22 °F to +158 °F)
Operating Humidity 10 ~ 90%
Operating Altitude 5000m
Dimension 138 mm × 160 mm × 49 mm
Net Weight 2.83Kg (with packages)
ok
Start Your Training