4K Full HD WDR IR Vandal Dome Camera - 100Mtr.
|Image Sensor||1/2.5” 8MP Progressive scan CMOS|
|Minimum Illumination||0.05Lux/F1.4 (Color,1/3s,30IRE), 0.2Lux/F1.4 (Color,1/30s,30IRE), 0Lux/F1.4(IR on)|
|Video Streaming||Main Stream: 4K(1~15fps)/ 3M(1~25/30fps) Sub Stream: D1(1~25/30fps) Third Stream: 720P(1~25/30fps)|
|S/N Ratio||More than 50dB|
|Shutter Speed||Auto/Manual, 1/3~1/100000s|
|White Balance||Auto/Natural/Street Lamp/Outdoor/Manual|
|Resolution||4K(3840×2160)/6M(3072×2048)/5M(2560×1920)/ 3M(2048x1536)/3M(2304×1296)/ 1080P(1920×1080)/ 1.3M(1280x960)/ 720P(1280×720)/D1(704×576/704×480)|
|Micro SD||Mirco SD card 128GB|
|Back Light Comp.||BLC / HLC / WDR|
|Audio Input||1 Channel|
|Audio Output||1 Channel|
|Weatherproof Standard||IP67 & IK10|
|Gain Control (AGC)||Auto/Manual|
|Protocol||HTTP; HTTPs; TCP; ARP; RTSP; RTP; UDP; SMTP; FTP; DHCP; DNS; DDNS; PPPOE; IPv4/v6; QoS; UPnP;NTP; Bonjour; 802.1x; Multicast; ICMP; IGMP; SNMP, ONVIF, PSIA, CGI|
|Privacy Mask||Off / On (4 Area, Rectangle)|
|ROI||Off / On (4 Zone)|
|Smart Phone||iPhone, iPad, Android Phone|
|Alarm IN||1 channel In: 5mA 5VDC|
|Alarm Out||1 channel Out: 300mA 12VDC|
|Motion Detection||Off / On (4 Zone, Rectangle)|
|Bit Rate||H.264: 24K ~ 10240Kbps, H.265: 14K ~ 9984Kbps|
|Operating Temperature||-30° C ~ +60° C, Less than 95% RH|
|User Account||10/ 20 Users|
|Smart Detection||Tripwire, Intrusion, Object Abandoned/Missing, Face detection|
|Power Source||DC12V, AC24V, ePoE|
|IR Range||IR Range of 100 Mtr.|
Latest version for gCMOB Android: - 2.4.6
Latest version for iCMOB IOS: - 2.4.8
It’s not possible to create any new preset through gCMOB we can only call existing preset.
gCMOB allows us to run only preset so as of now this function not supported.
A Push-Notification is a message that pop-ups on a mobile device .When front end device generates alarm push, client end will receive alarm info from the device, and Users don’t have to be in the app and using their devices to receive them.
Push notification is the function to push alarm info generated on device to mobile phone by integrating device alarm module user can view alarm record, preview and playback picture according to push info. Steps to configure push notification: Go to Alar
Password protection of mobile app. After you have set password, every time you login, you must verify password for security purpose.
We can create more than 256 favorite view through gCMOB.
No, It’s not possible to reset DVR password .Master password work only from Monitor/Display.
No it’s not possible to format Device HDD through App but, you can view HDD name, Status, Free capacity and total capacity.
Yes we can change Camera name through gCMOB from remote configuration and camera setting.
Through Remote Configuration you can perform function of motion detect, Alarm setting, Camera setting, Storage manager and user manager.
Max playback speed is 8x fast forward.
Yes we can control PTZ speed through gCMOB/iCMOB.
with instant playback camera start play recording with few seconds earlier in live preview. Limit 5Sec to 60 Sec.
Yes we can add PC-NVR on gCMOB app through Local network or Static IP.
gCMOB supported max 4 playback split.
No it’s not possible gCMOB supported only CPPLUS orange series products.
If we have a cloud account on www.orange.instaon.com and the account is bound with devices, then you can Import corresponding devices on client without manually adding one by one.
No we can’t take backup of playback but we can record locally through app.
Right now this function is not available on app in the next version of gCMOB we can zoom the camera through app.
No, we can’t change the mode of cosmic camera through app.
No, we can’t import/export gCMOB setting.
Yes, we can create recording schedule through App.
Three modes (IP/Domain, InstaOn, Wi-Fi Configuration). Through Manual we can add device by Domain name / IP / Serial no.
Yes, gCMOB supports Two-Way talk.
E-Map function, to show cameras on an electronic map of household or area.
It is by default in c drive -folder name ( RecordDownload ).
In which cam have OSD menu that cam’s OSD we can open.
No, we get different, Window for different device.
It is by default in c drive – (folder name) PictureDownload.
We can only view the recording.
No (ActiveX file format not support for mobile)
No (only preset /tour option available)
.dav file format. (smart player requires)
For access orange DVR/NVR/IP camera
Not possible, it is by default.
No, both have diff default path of local record so not taken.
For this we click on start button and search (p2pservillance) remove that file and then reset ie (internet explorer) and install new ActiveX and login with InstaOn account and allow webactiveexe.
It supports 17 characters
Sometimes it will take few minutes 5/10 min to show online in site.
For that type orange.InstaOn.com/soft/InstaOnActiveX.exe in address bar to download file manually.